banner
Punching Press

Punching Press

  • The punch is a punching press. In national production, the stamping process has the advantages of saving materials and energy, higher efficiency than traditional mechanical processing, low technical requirements for operators, and making products that cannot be achieved by mechanical processing through various mold applications. Its uses are becoming more and more extensive.

Product Details

Introduction

The punch is a punching press. In national production, the stamping process has the advantages of saving materials and energy, higher efficiency than traditional mechanical processing, low technical requirements for operators, and making products that cannot be achieved by mechanical processing through various mold applications. Its uses are becoming more and more extensive.

The design principle of the punch press is to convert circular motion into linear motion. The main motor generates power to drive the flywheel. The gear, crankshaft (or eccentric gear), connecting rod, etc. are driven by the clutch to achieve the linear motion of the slider. The movement of the connecting rod is a circular movement.


Matters needing attention when using punch:

Before work

⑴Check the lubrication of each part, and make each lubrication point get sufficient lubrication

⑵Check whether the mold installation is correct and reliable;

⑶Check whether the compressed air pressure is within the specified range

⑷Check whether the switch buttons are sensitive and reliable, and the motor can be turned on only after the flywheel and clutch are disconnected;

⑸ Let the press perform several idle strokes to check the working conditions of the brake, clutch and operating parts

⑹Check the main motor for abnormal heating, abnormal vibration, abnormal sound, etc.

⑺ Use a manual oil pump to add lithium-based ester oil to the slider

⑻Check and adjust the feeder roller gap to the process requirements

⑼Check and keep the oil volume of the lubricator up to the specified requirements

⑽ When the motor starts, check whether the flywheel rotation direction is the same as the rotation mark.

At work

 ⑴The manual lubricating oil pump should be used to pump lubricating oil to the lubrication point regularly

⑵ When the performance of the press is not familiar, it is not allowed to adjust the press without authorization

⑶ It is forbidden to punch two layers of sheets at the same time

⑷ If the work is found to be abnormal, stop work immediately and check in time.

After work

⑴ Disengage the flywheel and clutch, cut off the power supply, and release the remaining air

⑵Wipe the press clean and apply anti-rust oil on the work surface

⑶ Make a record after each operation or maintenance

Punching Press


Our Advantages

We are an experienced factory

We provide a variety of hydraulic presses with different tonnages for you to choose

We can print your logo in our packaging

We can customize the color according to your needs

We can do OEM

Punching Press1


Services

1. Product quality control and delivery time is strictly controlled;
2. Direct manufacturing factory offering competitive price;
3. All the inquiries will be replied within 12 hours;
4. OEM & ODM service are available;
5. Providing first-class after-sales services to the customers.

Punching Press2


FAQ

1.Q: How does your factory conduct quality control?

Answer: Two-year quality warranty and lifetime technical support.

2. Q: What kind of machinery can you produce?

Answer: The automobile industry, metal stretching. Single-column hydraulic presses, four-column hydraulic presses, frame hydraulic presses, servo hydraulic presses, etc. for various purposes such as plastic products and powder molding.

3.Q: How is the quality of your products?

Answer: Our products have been well received by customers.

 

Hot Tags: punching press, China punching press suppliers, manufacturers, factory, Punching Machinery, Punching Press, High Speed Punch Machinery, Punching Machines

Inquiry