Powder Forming Hydraulic Press
-
Powder forming hydraulic press can assemble, disassemble, straightening, calendering, pressing, stretching, bending and punching of machine parts.
Introduction
Powder forming hydraulic press can assemble, disassemble, straightening, calendering, pressing, stretching, bending and punching of machine parts. Each hydraulic press equipment combines an industry-leading design with a thick, fully-welded steel plate frame. We build every hydraulic press to provide fine control and to save you time and effort—throughout many years of productivity.
Ranging from 10 to 2000 tons in capacity, our hydraulic presses will handle all the force you can throw at them. Choose a hydraulic press (for added power) or a pneumatic shop press (air-powered, typically with lighter capacities) or hand operated h-frame shop press.
We can customize according to your request, for example, enlarge the workbench, let the worktable move, add two cylinders and so on
Features
1. High efficiency and energy saving, the electricity consumption is 30%-50% more energy-saving than ordinary motors.
2. Low noise, the noise can be controlled at about 75 decibels.
2. Working position, speed and pressure can be adjusted infinitely.
3: Quick response, high pressure and high position repeat accuracy.
4: High efficiency, multiple protections inside, extremely low failure rate.
5. 12 hours of continuous work does not require cooling oil temperature.
6. Pipes and joints adopt SEA international standards to prevent oil leakage from the pipeline.
7. Adopt button centralized control, two control modes (fixed range/constant pressure), and two operation modes (adjustment/automatic).
8. European CE standard hydraulic system and electrical safety IP54 level.
Application
Production process
1.Raw Material
2.Whole Plate Grinding
3.Blanking
4.Welding
5.Fine Finishing
6.Polish
7.Upper Primer
8.Assemble
9.Spray Paint
10.Finished
FAQ
1. Q: Are there any protective measures when packaging?
Answer: Cover with PE film, wrap with waterproof paper, wrap with wooden board, tie it tightly with steel tape, and fix it on the pallet.
2.Q: Can I know which payment your company accepts?
Answer: So far, we can provide 100% T/T before shipment, and 30% deposit paid by T/T, and the balance paid by L/C.
Hot Tags: powder forming hydraulic press, China powder forming hydraulic press suppliers, manufacturers, factory, Vertical Hydraulic Press, Hydraulic Press 250 Ton, Stretching Hydraulic Press, Hydraulic Press For Wheel Barrow, Hydraulic Workshop Press, Hydraulic Press For Track Chain
