What is the function of single column hydraulic press

For single column hydraulic press, the most suitable is the plunger pump, other pumps are not suitable.

The operating procedures of single column hydraulic press are as follows:

(1) The equipment should be checked and lubricated before operation. If there is any problem, it should be handled in time to ensure the normal use of the equipment.

(2) During the test run of the hydraulic press, it is necessary to pay attention to whether the piston stroke, the three operating positions of "top pressure", "pressure maintaining" and "exit" are correct and reliable, and whether the display of pressure gauge is normal.

(3) Before pressing the bearing, the wheel neck should be wiped clean, then lubricated, and then installed. It should be installed in place without inclination.

(4) At the end of each work, put the block to the lowest position.

Precautions for single column hydraulic press are as follows:

(1) If you do not understand the equipment, then do not start the equipment without authorization, so as to avoid damage to the equipment or danger.

(2) When the equipment is working, it can not be overhauled. In addition, the equipment is strictly prohibited to work with disease.