What are the key points for maintenance of gantry hydraulic press?

Hydraulic system maintenance:

Change the hydraulic oil regularly to ensure the stable operation of the hydraulic system. According to the requirements of the machine tool manufacturer, select the appropriate hydraulic oil and ensure the cleanliness of the hydraulic oil.

Regularly check the oil level and oil quality in the hydraulic system, and promptly remove impurities and pollutants to prevent sediments from adversely affecting the system.

Check the seals in the hydraulic system. If aging, cracking or oil leakage are found, replace them in time to avoid problems such as oil leakage and pressure instability in the system.

Regularly clean and maintain key components such as hydraulic cylinders and hydraulic valves to ensure their normal operation and improve the working efficiency of the entire machine.

Maintenance of mechanical parts:

Regularly check the mechanical structure and transmission components of the gantry hydraulic press, such as slide rails, guide rails, gears, etc., to see if they are worn or loose. If there are any problems, repair or replace them in time.

Check the pulling and lubrication conditions of the transmission chain and maintain proper tension and lubrication of the chain to ensure smooth and normal operation of the transmission.

Clean the mechanical parts regularly to remove impurities and dust, and apply an appropriate amount of lubricating oil to keep the mechanical parts hygienic and lubricated.

Maintenance of electrical parts:

Regularly check the electrical system of the gantry hydraulic press, including the motor, controller, circuits and connectors, etc., to see if it is operating normally and whether there are leakage, short circuit, virtual connections and other problems, and repair or replace problematic parts in a timely manner.

Wipe the electrical parts regularly to keep the surface dry and clean to avoid moisture and dust entering the electrical system and prevent electrical parts from malfunctioning.

Safety protection maintenance:

Regularly check the safety protection devices of the gantry hydraulic press, such as emergency stop buttons, protective covers, photoelectric switches, etc., to ensure their sensitivity and normal operation to avoid dangerous accidents.

Provide training and safety education to relevant employees, strengthen operational standardization and safety awareness, and prevent accidents caused by improper operation.

Regularly check the working environment of the hydraulic press to ensure that the surrounding environment is clean and barrier-free, and maintain good ventilation to prevent moisture and dust from entering the machine and affecting the normal operation of the hydraulic press.