Composite Manhole Cover Forming Hydraulic Press

Introduction

Composite manhole cover forming hydraulic press adopts technology and equipment to mould the moulding material, which is pre-made with resin, glass fiber, filler and other raw and auxiliary materials, and then moulded or injection moulded products;

It is recommended to use a 200-ton 315-ton Composite manhole cover forming hydraulic press for resin composite manhole cover hot press molding. The machine parameters such as table size, opening, stroke, speed, etc. can be customized according to customer requirements.

The carrying capacity of heavy manhole covers is up to 400KN or more; this product can be used normally at -40℃ to 90℃;

Application

The production process steps of resin composite manhole cover:

1. Prepare a well-stirred BMC mass resin composite material

2. Measure and fill the resin raw materials into the mold of the required model

3. Place the welded steel frame into the mold and fix it firmly

4. Fill the remaining resin raw materials into the mold assembly and spread it out evenly

5. Start the composite manhole cover forming hydraulic press-315 ton composite material molding press machine to press the product

6. The product is gradually solidified and formed under the high temperature of the mold and the high pressure of the machine

7. When the designed pressure holding time is up, the composite well cover forming hydraulic press-315 ton composite material molding press begins to return, the product is formed, taken out of the mold, and the temperature is lowered.

8. Take out the product, clean up the burrs, make it smooth around, place it stably, and place it deformed.

9. The Composite manhole cover forming hydraulic press will initially cool down, install the required accessories, and carry out a 1-meter free fall weight test.

Hot Tags: composite manhole cover forming hydraulic press, China composite manhole cover forming hydraulic press suppliers, manufacturers, factory,